BWSK Manual

BWSK Manual

In order to start using the BWSK and set up the WiFi connection, one should first download and install the Bindelo app into an Android device or iOS device and create a Bindelo Central account.

To create a Bindelo Central account follow this link: Bindelo Central signup

The Bindelo app is available on:

and 

Power on and setup mode

To power on the BWSK connect the included  AC/DC adapter to the BWSK, connect the K type thermocouple probe to the BWSK and connect the AC/DC adapter to an electric power outlet.

As the BWSK initialize, the Bindelo logo will be displayed on the LCD display and then the BWSK will enter into setup mode for 180 seconds (3 minutes). The remaining time for setup will be displayed as a count down in seconds on the BWSK display.

If the setup time is over without receiving any changes in the configuration the BWSK will continue to connect to the Wifi with the previous settings from the last setup.

WiFi setup

To set up the WiFi connection for the first time or change the WiFi connection settings please follow the instruction on this article: Configure and add a WiFi device using the Bindelo app

Changing temperature units on the display

The article about how to change the temperature units on the display can be found on the following link: Changing temperature units on the BWSK display

Changing temperature units on the reports

On this article is explained how to change the unis of measure: Units of measure change.

Changing the sampling rate

Changing sensor label  on reports and events

Cart

Product categories